Air Preparation Equipment




Air Cooled Aftercooler   HAA
Series/CADApplicable compressorAir flow capacity L/min (ANR)
HAA 7.5 to 37 kW1000 to 5700
Features
  • Can cool high temperature compressed air from compressors down to 40ºC or less and efficiently remove moisture from the air.
  • Cooling equipment is not required for this air cooled type.
  • Maintenance is easy and the running cost is reasonable since this is free from concerns such as water supply cut-off or freezing.

Water Cooled Aftercooler   HAW
Series/CADApplicable compressorAir flow capacity L/min (ANR)
HAW 2.2 to 110 kW300 to 18000
Features
  • Can cool high temperature compressed air from compressors down to 40ºC or less and efficiently remove moisture from the air.
  • Stable operation is possible even in an environment with a hightemperature, high moisture and heavy foreign particles for this water cooled type.

Air Tank   AT
Series/CADPort sizeCapacity (L)
AT 1/2 to 4B flange100 to 3000
Features
  • Accumulates the compressed air from compressors, also prevents it from being pulsated, and cools it.

Refrigerated Air Dryer   IDF/IDU


*Series IDFxE/IDUxE
Series/CADApplicable compressorAir flow capacity m3/min (ANR)
50 Hz60 Hz
IDF1E to 75E 0.75 to 75 kW0.10 to 11.00.12 to 12.4
IDF120D to 240D 120 to 240 kW20.0 to 43.023.0 to 50.0
IDF370B 370 kW54.065.0
IDU3E to 75E 2.2 to 75 kW0.32 to 11.00.37 to 12.5
Features
  • Increases the air flow rate by a maximum of 40%*. (SMC comparison)
  • Reduces the power consumption by a maximum of 40%*. (SMC comparison)
  • Refrigerant:
       R134a (HFC) [IDF1E to 15E/IDU3E to 15E]
       R407C (HFC) [IDF22E to 240D/IDU22E to 75E]
  • Improved corrosion resistance with the use of a stainless steel, plate type heat changer. (IDF4E to 75E/IDU3E to 75E)

Refrigerated Air Dryer/For Use in Europe, Asia, and Oceania  IDFAxE
Series/CADAir flow capacity m3/h (ANR)Applicable
standard
Outlet air pressure dew point
3ºC7ºC10ºC
IDFA3E to 75E 12 to 66015 to 72017 to 822CE
Features
  • EC Directive compliant (with CE marking)
  • Power supply voltage: Single-phase 230 VAC (50 Hz)
  • Refrigerant: R134a (HFC), R407C (HFC); Coefficient of destruction for ozone is zero.
  • Improved corrosion resistance with the use of stainless steel, plate type heat changer (IDFA4E to 75E)

Refrigerated Air Dryer/For Use in North, Central and South America  IDFBxE
Series/CADAir flow capacity m3/h (ANR)Applicable
standard
Outlet air pressure dew point
37ºF (2.8ºC )45ºF (7.2ºC )50ºF (10ºC )
IDFB3E to 37E 10 (17) to 161 (273)11 (19) to 173 (294)12 (20) to 181 (308)UL, CSA
Features
  • UL certified product
  • Power supply voltage: Single-phase 115 VAC (60 Hz), 230 VAC (60 Hz)
  • Refrigerant: R134a (HFC), Coefficient of destruction for ozone is zero.
  • Improved corrosion resistance with the use of stainless steel, plate type heat changer (IDFB4E to 37E)

Heatless Air Dryer   ID
Series/CADOutlet flow L/min (ANR)Inlet flow L/min (ANR)
ID 80 to 780100 to 975
Features
  • Supply dry air with a low dew point below -30ºC.
  • Compact and lightweight without a heater or an electric control board.
  • Possible to check the outlet dew point with the indicator. (Selfregenerative style allows for easy maintenance.)

Membrane Air Dryer   IDG
Series/CADOutlet flow L/min (ANR)Standard dew point (ºC )
IDG1 to 100 10 to 1000-20
IDG3H to 100H 25 to 1000-15
IDG30L to 100L 75 to 300-40
IDG60S to 100S 50 to 150-60
Features
  • Non-freon
  • Power supply not required
  • Compatible with low dew points.
  • No vibration or heat discharge.
  • With a dew point indicator.
Labels: