HYDRO-TEK

Electro-Pneumatic Regulators/Proportional Valves/Boosters

Electro-Pneumatic Regulator   ITV
	Series/CAD Port size Set pressure (MPa) ITV0000  Built-in One-touch fitting φ4,φ5/32 0.001 to 0.1 0.001 to 0.5 0.001 to 0.9 -1 to -100kPa ITV1000  1/8,1/4 0.005 to 0.1 0.005 to 0.5 0.005 to 0.9 ITV2000  1/4,3/8 ITV3000  1/4,3/8,1/2 Features Stepless control of air pressure in proportion to electric signals Sensitivity: 0.2 kPa (100 kPa specification) Linearity: ±1% or less (F.S.) Hysteresis: 0.5% or less (F.S.)

Electronic Vacuum Regulator   ITV
	Series/CAD Port size Set pressure (MPa) ITV209x  1/4 -1.3 to -80 Features Stepless control of vacuum pressure in proportion to electric signals

Controller for Electro-Pneumatic Regulator   IC
	Series/CAD Features IC  Can be mainly used integrated with the ITV0000 series without a display function. Converts digital input signal into analog output signal 10 bit parallel input signal (maximum). · Pressure setting of 210 = 1024 points possible. 4 point preset output · Applicable in the programming function with up to 20 steps.

Compact Proportional Solenoid Valve   PVQ
	Series/CAD Flow control range L/min Fluid PVQ  0 to 5 0 to 6 0 to 75 0 to 100 Air, inert gas Features Stepless control of flow rate in proportion to current. Repeatability: 3% or less Hysteresis: 10% or less

Electro-Pneumatic Proportional Valve   VEF/VEP
	Series/CAD Port size VEF/VEP  1/4,3/8,1/2 Features Stepless control of air flow or pressure by use of electric signals Press-die cushions Pressure control of welding machine and low pressure casting Multi-stage speed control of air cylinder and rotation control of air motor

5 Port Electro-Pneumatic Proportional Valve   VER
	Series/CAD Port size Set pressure (MPa) VER2000·4000  1/4,3/8,1/2 0.1 to 0.9 Features Stepless control of cylinder and applied pressure Applicable cylinder φ25 to φ125 Available for exhaust throttle and B port pressure regulation.

Power Amplifier for Electro-Pneumatic Proportional Valve   VEA
	Series/CAD Features VEA250  Dedicated amplifier for driving an electro-pneumatic proportional valve Low current command signal High dither effect Stabilizing the performance of the electro-pneumatic proportional valve VEA251  VEA252

E-P HYREG®   VY2
	Series/CAD Port size Set pressure (MPa) VY2  M5 x 8 1/8,1/4,3/8,1/2,3/4,1,11/4,11/2,2 0.05 to Supply pressure Features Stepless control of pressure by use of electric signals Thrust control of cylinder Flow control of nozzle Pressure control of tank

Booster Regulator   VBA
	Series/CAD Port size Set pressure (MPa) VBA  1/4,3/8,1/2 VBA111x: 0.2 to 2.0 VBA2xA: 0.2 to 1.0 VBA4xA: 0.2 to 1.0 VBA43A: 0.2 to 1.6 Features Can increase the factory air a maximum of 200 %, power supply not required. Possible to get a maximum of double pressure by connecting air with a factory line. (VBA1111: maximum 4 times) Space-saving type that directly connects air tanks and booster regulators.

Air Tank   VBAT
	Series/CAD Port size Tank capacity (L) VBAT  3/8,1/2,3/4 5,10,20,38 Features Compact air tank that can be directly connected with a regulator. Can be used as an independent tank. With a safety valve port. (Optional)

Pressure Control Valve   AP100
	Series Port size Set pressure (MPa) AP100  1/8,1/4 0.05 to 0.69 MPa Features Releases pressure over the set range into an atmosphere and constantly maintains the pressure in a pipe.